Due to overwhelming workload, fully painted helmets are currently unavailable.
• Helmet from strong impact resistant polyurethane plastic with stabilization fillers
• Helmet thickness: 1/8" - 1/4"
• Approx. total weight of helmet: 2lb 6oz. for Fixer helmet (heaviest with comms box)
Fixer communications box and antenna can be purchased here.
See my finishing notes here.
Options:
Raw cast helmet
A raw cast with the little detail pieces for the mouth area, but it does not include the visor or lights. Pre-cut visor slot, side air vents, speaker vents, and hole for common 5mm clear LED. Will require sanding possibly filling and reinforcing thin spots
Ready to paint (RTP)
Same as above, but trimmed and helmet in gray primer with mouth detail pieces. No visor or lights.
RTP with lighted visor
Same as above, but adds lighted and tinted double visor with side spotlight (always on) and battery holder with switch (3xAA)
RTP with lighted visor and fans
Same as above, but adds fans to both sides, a rechargeable battery pack (5V 5000mAh), and a toggle switch to disable fan.
Raw comms
This is just for raw resin comms part and wood antennas for Fixer/Atin
Installed comms
This can only be ordered with RTP helmets. Installed resin comms part and wood antennas for Fixer/Atin